Mirror Demisters

R 363.00R 546.00

The COLDBUSTER ®  ultra-thin mirror demister pads are attached to the back of your mirror with self adhesive to prevent mirrors from fogging up.

The electric heating pads provide heat which conducts through to the mirror, warming up the mirror surface and preventing condensation.

Every time you step out from the shower or bath, your mirror will be crystal clear.

Available in different sizes.

Download the COLDBUSTER Demister Installation Instructions.

Clear
Compare

Description

The element is fully screened and self-regulating.  It is laminated between 2 layers of polyester reinforced aluminium foil.

Installation is easy:  Place the mirror on a flat firm surface with the reflective side down and degrease if necessary with a suitable cleaning agent such as cleaning spirits and allow to dry.

Take the mirror demister out of its self-adhesive side in the desired position against the back of the mirror and press and rub the entire area with a soft cloth until the unit is firmly attached to the mirror.

The 230V units must be connected to earth and protected by an earth leakage circuit breaker (ELCB).
12 Volt units must be powered from an isolation transformer.

Additional information

Sizes

300mm x 300mm 12V, 400mm x 400mm 12V, 600mm x 400mm 12V, 600mm x 400mm 230Vac, 600mm x 600mm 12V, 600mm x 600 mm 230Vac